Please use this identifier to cite or link to this item: http://hdl.handle.net/20.500.12188/28611
DC FieldValueLanguage
dc.contributor.authorHadzievska, Kristinaen_US
dc.contributor.authorArangjelovski, Tonien_US
dc.contributor.authorNakov, Darkoen_US
dc.contributor.authorMarkovski, Goranen_US
dc.date.accessioned2023-11-30T19:08:18Z-
dc.date.available2023-11-30T19:08:18Z-
dc.date.issued2020-
dc.identifier.isbn978-961-94071-8-9-
dc.identifier.urihttp://hdl.handle.net/20.500.12188/28611-
dc.description.abstractSUMMARY: Sulfate attack is a complex severe set of chemical and physical processes that have great influence on concrete durability by changing the microstructure of the cement paste and concrete. Sulfate resistance of concrete should be obtained including requirements for low-permeability concrete, use of sulfate resistance cement and proper production of concrete. In this paper an extensive experimental research is presented on the possibility of using fly ash as a partial replacement of OPC clinker and its influence on the sulfate resistance of cement. For that purpose, four samples of fly ash from the TPP Bitola were taken in the time period of two weeks. All cement components including fly ash were completely tested from the aspect of chemical composition and physical properties. Two samples of fly ash which showed the biggest difference in their fineness were chosen for further investigations and preparation of cements. Laboratory cements were prepared by varying the quantity of fly ash as replacement of OPC clinker, from 0% to 50%. For all laboratory produced cements complete chemical analysis and determination of the physical and mechanical properties have been carried out. The method of Koch & Steinegger and the recommendations of the Technical Committee of Cement given in CEN/TR 15697 were used for determination of sulfate resistance of the laboratory cements. According to this method, small specimens (prisms with dimensions 10/10/60mm) were prepared and then cured in deionized water and aggressive solution – 4.4% Na2SO4. The corrosion coefficient calculated on the basis of flexural strength of the specimens tested after 56 days in aggressive solution was used as indicator of sulfate resistance of the cements. On the basis of the test results, it is determined that the fly ash and all laboratory cements fulfil the quality criteria defined in the standards. It is also concluded that the cements with 30% fly ash show the best results from the aspect of sulfate resistance.en_US
dc.language.isoenen_US
dc.publisherSlovenian National Building and Civil Engineering Institute (ZAG)en_US
dc.subjectKEY WORDS: fly ash, sulfate resistance, aggressive sodium sulfate solution, Koch & Steinegger methoden_US
dc.titleSulfate resistance of cement with different volumes of fly ashen_US
dc.typeProceedingsen_US
dc.relation.conference2nd International Conference on Construction Materials for Sustainable Future, CoMS 2020/21en_US
item.grantfulltextopen-
item.fulltextWith Fulltext-
crisitem.author.deptFaculty of Civil Engineering-
crisitem.author.deptFaculty of Civil Engineering-
crisitem.author.deptFaculty of Civil Engineering-
Appears in Collections:Faculty of Civil Engineering: Conference papers
Files in This Item:
File Description SizeFormat 
Sulfate resistance of cement with different volumes of fly ash.pdf786.24 kBAdobe PDFView/Open
Show simple item record

Page view(s)

10
checked on May 10, 2024

Download(s)

1
checked on May 10, 2024

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.