Please use this identifier to cite or link to this item: http://hdl.handle.net/20.500.12188/31606
DC FieldValueLanguage
dc.contributor.authorRisto V. Filkoskien_US
dc.contributor.authorLongin Przybylskien_US
dc.contributor.authorIlija J. Petrovskien_US
dc.date.accessioned2024-10-09T16:07:47Z-
dc.date.available2024-10-09T16:07:47Z-
dc.date.issued2000-11-
dc.identifier.urihttp://hdl.handle.net/20.500.12188/31606-
dc.description.abstractThe article refers to a mathematical method for estimating the efficiency of the combustion process in bubbling fluidised bed conditions. The calculation procedure used in this work is given elsewhere [1, 2] and, here, it is only briefly described. The objective of the present investigation is to validate the mentioned method when using brown coal as a fuel in a laboratory fluidised bed combustor. Particular attention is devoted to the subject of elutriation of fuel particles out of the combustor, considering the fact that it is one of the most important factors limiting the combustion efficiency and the furnace design as well. The work presented here contains the conditions and some results of experimental research in heat losses resulting from the phenomenon of elutriation of combustible particles [3]. Experiments were carried out in a combustor with an inner diameter of 200 mm and a height of 1200 mm. A numerical testing of the method for estimating the combustion efficiency was accomplished within a bed temperature range from 780 °C to 900 °C and a fluidising velocity from 1.20 to 1.32 m/s. The results achieved were compared with the experimentally obtained data. Besides the appearance of some deviations, it may be stated that the results are reasonable and in line with the expectations.en_US
dc.language.isoenen_US
dc.publisherVinča Institute of Nuclear Sciences, Belgradeen_US
dc.relation.ispartofThermal Science (An International Journal)en_US
dc.relation.ispartofseriesVol. 4;No. 2, pp. 101-111-
dc.subjectCombustion, stationary fluidised bed, boiler, combustion efficiencyen_US
dc.titleVERIFICATION OF METHOD FOR ESTIMATING COMBUSTION EFFICIENCY IN A BUBBLING FB COMBUSTORen_US
dc.title.alternativeThermal Science (An International Journal)en_US
dc.typeArticleen_US
item.fulltextWith Fulltext-
item.grantfulltextopen-
Appears in Collections:Faculty of Mechanical Engineering: Journal Articles
Files in This Item:
File SizeFormat 
2000-02-07-Thermal Science-Filkoski-Przybilski-01.pdf4.77 MBAdobe PDFView/Open
Show simple item record

Page view(s)

36
checked on May 3, 2025

Download(s)

3
checked on May 3, 2025

Google ScholarTM

Check


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.